Power Supplies

Cooling Technology



Contact Us


About Us


Thunder K7X (S2468) Motherboard

Tyan's Thunder K7X is Tyan's next generation dual-processor platform for the AMD Athlon MP processor. Like its predecessor (the Thunder K7), this system board provides cutting-edge performance for today's most demanding workstation and server applications, and includes powerful connectivity and storage support features. Based on the AMD-760 MPX chipset, the Thunder K7X utilizes a 66MHz 64-bit PCI bus for blistering I/O performance. It also supports DDR RAM, AGP Pro (as well as integrated VGA), dual LAN controllers, dual-channel Ultra 160 SCSI and more.


Call Us Today!



Have other rackmount needs? Visit



Standard Features | Back to Top |

  • Processor
    Dual PGA462 ZIF sockets
    Supports up to two AMD Athlon MP processors
    Two onboard VRMs
    System bus support for 200MHz and 266MHz
    Processor speeds:
    CPU chart
  • Integrated 2D/3D Graphics
    ATI RAGE XL graphics controller
    4MB frame buffer (SDRAM)
    Standard 15-pin analog VGA port
  • Chipset
    AMD-760 MPX chipset
    AMD-762 north bridge & AMD-768 south bridge
    Winbond W83627HF Super I/O ASIC
  • Integrated SCSI (optional)
    Adaptec AIC-7899W controller
    Dual-channel Ultra 160 SCSI support
    160MB/sec maximum data throughput per channel
    Support up to 15 LVD SCSI devices per channel
    Channel A and Channel B - 68-pin connectors
  • System Memory
    Four 2.5v 184-pin DDR DIMM sockets
    25 angled sockets enable rackmount installation
    Supports up to 4GB of Registered PC2100 DDR memory
    Supports ECC (72-bit) memory modules
  • Server Management (optional)
    Tyan-defined 50-pin header connects to Server Management Daughtercard (SMDC), which supports the Intelligent Platform Management Interface (IPMI)
    Q-Logic Zircon Baseboard Management Controller (BMC)
    Support for IPMI, SDR, SEL, FRU
    I2C and IPMB
  • Hardware Monitoring
    Winbond W83782D hardware monitoring ASIC
    3-pin fan monitoring headers
    CPU temperature and voltage monitoring
  • BIOS
    Phoenix BIOS 4Mb Flash ROM
    Supports APM v1.2 and ACPI v1.0
    User settings for hardware monitoring
    Auto-configuration of IDE hard drive types
    Multiple boot options
    DMI 2.0 compliant
  • Expansion Slots
    One AGP Pro slot; also supports 4x AGP
    One 64-bit 66MHz (3.3-volt) PCI slot
    One 64-bit 66MHz (5-volt) PCI slot
    Three 32-bit 33MHz (5-volt) PCI slots
    Total of six usable slots
  • Form Factor
    Extended ATX footprint (13" x 12", 330.2mm x 304.8mm)
    One 24-pin and one 8-pin ATX-GES power connectors
    Stacked parallel (one), serial (one) and VGA (one) ports
    Side-by-side LAN (two) port
    Stacked keyboard and mouse ports
  • Integrated I/O
    One floppy connector supports up to two drives
    One 9-pin 16550-based serial port
    One 25-pin SPP/ECP/EPP parallel port
    Four USB ports (two via optional cable)
    PS/2 keyboard and mouse port
  • Regulatory
    FCC DoC (Declaration of Conformity) certified
    European CE (Declaration of Conformity)
  • Integrated PCI IDE
    Dual-channel master mode
    Supports up to four enhanced IDE devices
    Support for ATA-100/66/33 IDE and ATAPI compliant devices
  • Integrated LAN
    Two 3Com 3C920 LAN controllers
    10/100Mbps data transfer rate per controller




    Home, Servers, Rack Chassis, Power Supplies, CPU Cooling, AMD™ CPUs, Motherboard, Contact Us, Ordering, About Us


    2001 Computer & Control Solutions Inc (CCSI). All rights reserved.

    All product names on this website are trademarks of their respective companies.